2 Post Car Lifts North West
GT Services (NW) Ltd have a full range of 2 post lifts available. Working in conjunction with leading vehicle manufacturers we are able to offer an affordable range of 2 post vehicle lifting equipment.
Crypton Two Post Lift
Crypton's quality
2-post lift is electro-mechanically operated and
suitable for lifting cars, vans and light trucks
up to 3 tonnes.
Its adjustable, asymmetrical lifting arms swivel
180° to position the vehicle off-centre and
provide optimal door clearance to access the
vehicle's interior.
Its baseless structure allows you to lift
vehicles from the lowest lifting point and the
adjustable overhead gantry offers a flexible
height and width installation.
• Baseless for a low
lifting point
• Adjustable asymmetric lifting arms
• Low wear Nylatron nut
• Adjustable width and height frame
• Twin motors for perfect synchronisation
• Resistant Poly-V belt
• LED display for simple and safe operation
• Manufactured with hard chrome cylinders
• Cylinders protected by galvanised covers
Crypton Two Post Lift 4.2t
This 2-post lift is
electro-hydraulically operated for lifting cars,
vans and light trucks up to 4.2 tonnes.
It is equipped with four long 3-stage
symmetrical arms to extend or collapse to the
length required for lifting the vehicle from the
middle or long wheel-base vehicles with a load
in the rear. It's symmetrical arms also offer
the greatest amount of drive through space and
for getting in and out of the vehicle.
Its baseless structure allows you to lift
vehicles from the lowest lifting point. Read
more features and benefits below.
• Baseless for a
low lifting point
• Symmetric 3-stage arms
• Laser cut carriages and arms - robot welding
• Two height options (4m or 5m)
• Mechanical safety latch with automatic
engagement
• Twin maintenance free lifting cylinders
• High efficiency motors
• Carriage synchronisation by cable
• Pulley protected inside the column
• Door protection on columns
• Optional high lift pads
• Quiet and quick operation
• Manufactured in Italy
• 3 years warranty (UK mainland only)
Technique T1001 Two Post Lift
The T1001 is the most cost effective entrance into the world of hydraulic lifts with two columns. Compact dimensions, multipartite supporting arms, design and an ergonomic control allow for efficient operation in the car repair shop.
• Mechanical latching.
• Electro hydraulic.
• 3.5 tonne capcacity.
• 3 stage arms from and back.
• Baseless design.
• Height:3160mm Width:3320mm Capacity:3500kg
Rotary SPOA3T Two Post Lift
The SPOA3T two post lifts offer maximum drive-through clearance with minimum external dimensions. The asymmetrical design of the posts and supporting arms also provides a spacious pick-up area.
• Fully hydraulic.
• Asymmetric design.
• 3.5 tonne capacity.
• Optional electronic latching.
• Baseless design.
• Standard or sports car setting.
• Height:3920mm Width:3921mm Capacity:3500kg
Rotary SPOA40 Two Post Lift
Electro-hydraulic two post lifts of the SPOA series can be tailored perfectly to fit the application and can be combined with up to three different column heights. There are one manual and one electrical controller versions to choose from.
• Fully hydraulic.
• No lifting ropes or chains.
• 4.5 tonne capacity.
• Famous asymmetric design.
• Twin ram operation.
• Standard or sports car setting.
• Height:3778mm Width:3337mm Capacity:4000kg
Rotary SPO40 Two Post Lift
Electro-hydraulic two post lifts of the SPO series can be tailored perfectly to fit the application and can be combined with up to three different column heights. There are one manual and one electrical controller versions to choose from.
• Fully hydraulic.
• No lifting ropes or chains.
• 4.5 tonne capacity.
• Famous asymmetric design.
• Twin ram operation.
• Standard or sports car setting.
• Height:3778mm Width:3496mm Capacity:4000kg
Rotary SPO55 Two Post Lift
Electro-hydraulic two post lifts of the SPO55 series can be tailored perfectly to fit the application and can be combined with up to three different column heights. There are one manual and one electrical controller versions to choose from.
• Fully hydraulic.
• No lifting ropes or chains.
• 5.5 tonne capacity.
• 3 stage arms with screw pad assembly.
• Low pick up height.
• Standard or sports car setting.
• Height:4166mm Width:3497mm Capacity:5500kg
Rotary SPO65 Two Post Lift
Electro-hydraulic two post lifts of the SPO54 series can be tailored perfectly to fit the application and can be combined with up to three different column heights. There are one manual and one electrical controller versions to choose from.
• Heavy duty columns.
• 145mm pick up height.
• 6.5 tonne capacity.
• Air assisted safety latching.
• Single phase available.
• Height:4572mm Width:3937mm Capacity:6500kg
Vehicle Lifting Equipment Specialists in the North West
GT Services (NW) Ltd are a family run business based in Stockport, Greater Manchester. We supply the highest quality vehicle equipment for MOT testing stations and garages in the Northwest areas of Greater Manchester, Cheshire, Cumbria, Lancashire and Merseyside but are also able to work anywhere in the UK.
We are proud to have developed an outstanding reputation with our customers and agents. As a leading vehicle lifting equipment supplier in the North West, we pride ourselves on the best customer care and strive to make sure all our staff and engineers are trained to the to the highest standards so we can provide you with the best possible service.